Ideal for regular use in conjunction with other Fi-Clor chlorine sanitisers or for periods when the pool is not in use (eg when on holiday).
DO NOT MIX WITH OTHER PRODUCTS.
DO NOT DISSOLVE BEFORE USE.
> Adjust pH to 7.2-7.6 with Fi-Clor pH & Alkalinity
Reducer or Fi-Clor pH Increaser as appropriate.
> For best results, treat pool with Superfast Shock at
start of season.
> Allow 3-4 hours before bathing for unit to become
fully effective in untreated pool.
> Remove plastic label (tear along dotted lines) and
set 5-Buoy to the correct pool volume as shown.
We recommend saving the label for future reference.
> Rotate the blue cap of the 5-Buoy to select the correct hole size, appropriate to pool volume. (fig 1)
> Place the 5-Buoy in the deep end of the pool with narrow end downwards. Hold it partly immersed to exclude air, and ensure there is free water flow through the cartridge. Never submerge the blue buoyancy compartment.
> Make sure the 5-Buoy is floating vertically. With liner
pools keep away from sides to avoid bleaching.
> Maintain free chlorine residual between 2-4 ppm.
> When temporarily removing unit (e.g. if children are
unsupervised), stand it in a plastic bucket of cold water
free from contamination from other chemicals.
To resume treatment, replace unit in deep end and
empty bucket contents into pool.
> Cartridge floats on its side when empty. Replace with
another 5-Buoy; THE UNIT IS NOT DESIGNED TO BE REFILLED.
This floating dispenser is not a toy. Remove 5-Buoy from pool when using pool cover.
Do not put dispenser in the skimmer.