Fi-Clor Spa Hardness Increaser 1Kg

Be the first to review this product

Availability: In stock

£12.99
OR
Quick Overview

Fi-Clor Spa Hardness Increaser 1Kg

Fi-Clor Spa Hardness Increaser is used to raise the calcium hardness level in spa water. Calcium hardness is the amount of dissolved calcium and magnesium in pool water. If there is insufficient dissolved calcium, it will be difficult to balance the water - there could also be grout loss in tiled spas. High levels are not a major cause for concern provided the pH and alkalinity are within recommended parameters, but the reading should be kept below 750mg/l (ppm) if possible.

 

  • Raises the calcium levels of spa water

 


Fi-Clor Spa Hardness Increaser

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Fi-Clor Spa Hardness Increaser

Details

Instructions

1         Take a calcium hardness reading using your test kit or test strips. You will need to correct the calcium hardness if the reading is below 175mg/l (ppm) in acrylic spas or 250mg/l (ppm) in tiled spas.
2         The dose rate is 10g Fi-Clor Spa Hardness Increaser per 1,000 litres (220 galls) of spa water. Each dose will raise the hardness by approx 10mg/l (ppm).
3         Add no more than 100g at any one time, otherwise the water may cloud excessively.
4         With the circulation system running, sprinkle the product directly into the water around the perimeter of the spa. Do not pre-dissolve as this could generate excessive heat.
5         Use only when bathing has ceased and avoid the area around the skimmers.
6         Bathing may recommence when all the material has fully dissolved

 

Storage & Handling

 

  • Store in a cool, dry place.
  • Contact with combustible materials may cause fire.
  • Do not mix with other chemicals.
  • Always wear suitable gloves and eye protection when handling.


Additional Information
Model SKU00228
Manufacturer Pool & Spa Chemicals
Pack Size No