Lo-Chlor Maxi-Floc Plus is a heavy duty flocculent for all types of pool water

Lo-Chlor Maxi Floc Plus restores clarity to the cloudiest of pool waters in under 6 hours. This product leaves no messy residue and will also aid the removal of phosphates from your pool water.

General Instructions

• Calculate the volume of Maxi-Floc Plus required - for 50,000 litres use 1 litre of product
• Mix with water in a clean plastic bucket
• Set the pool filter to re-circulate. Where this setting is not available remove the filter cartridges or grids before opening the filter
• Adjust the pH to between 7.5 and 7.8 to achieve best results
• Turn on the circulation pump. and distribute the diluted Maxi-Floc Plus solution over the maximum pool area
• Run the circulation pump for 1 - 2 hours
• Leave the pool until all residue settles (within 6 hours)
• Vacuum to waste
• Replace filter cartridges or grids, where necessary
• Resume normal filtration
• It is important that the correct chemical balance of the pool water is maintained. 

Always read the product label