Fi-Clor Superfast Granules is a powerful shock and sanitiser. The granules are fast dissolving an therfore fast acting.
Use biocides safely. Always read the label and product information before use
DO NOT DISSOLVE BEFORE USE.
For use as a sanitiser:
1 Test the chlorine reading of the water.
2 Broadcast the product evenly over a wide area in the deepest part of the pool. It should only be used when bathing has ceased. Do not face into the wind when applying the granules.
3 Test the water daily.
For use as a Shock Treatment (for green or cloudy water)
1. Thoroughly brush off any algae that may be clinging to the pool surfaces.
2. Add 1kg per 50m3 (11,000 gals). Broadcast the product evenly over a wide area in the deepest part of the pool. It should only be used when bathing has ceased. Do not face into the wind when applying the granules. For heavy algae contamination, double this dose rate may be required.
3. Run the filter for 24 hours, then backwash it and vacuum the pool throughly. Any remaining haziness in the water should be removed using one of the Fi-Clor range of water clarifiers.
4. To help prevent a recurrence, ensure that free chlorine levels never fall below 1mg/l (ppm) for unstabilised or 2mg/l (ppm) for stabilised chlorine pools. Also dose the pool with one of Fi-Clor’s Long Life Algicides.
Always read the product label.
Warning: Do not use together with other products. May release dangerous gases (chlorine).
|Manufacturer||Pool & Spa Chemicals|