1.2 Kg Fi-Clor Spa Alkalinity Increaser

Be the first to review this product

Availability: In stock

Quick Overview

1.2 Kg Fi-Clor Spa Alkalinity Increaser 

Fi-Clor Spa Alkalinity Increaser corrects alkalinity when it falls below 80mg/l (ppm).

Fi-Clor Spa Alkalinity Increaser

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Fi-Clor Spa Alkalinity Increaser


Fi-Clor Alkalinity Increaser helps to prevent pH bounce

If the alkalinity is too low, most chemicals added to the spa will directly affect the water balance leading to rapid fluctuations in pH readings. Alkalinity at the correct level will help protect, or 'buffer' the pH.




1         Take an alkalinity reading using your test kit or test strips. You will need to raise the total alkalinity if the reading is below 80mg/l (ppm).
2         The dose rate is 30g Fi-Clor Spa Alkalinity Increaser per 1,000 litres (220 galls) of spa water. Each dose will raise the alkalinity by approx 10 - 20mg/l (ppm).
3         With the circulation running, dose directly in several areas around the spa, avoiding the skimmer. Only dose when bathing has ceased.
4         Re-test after 24 hours. If the total alkalinity is still low, repeat the dose.
5         Maintain alkalinity between 80 - 160mg/l (ppm).


Storage & Handling


  • Store in a cool, dry place.
  • Contact with combustible materials may cause fire.
  • Do not mix with other chemicals.
  • Always wear suitable gloves and eye protection when handling.


Use biocides safely. Always read the label and product information before use.

Additional Information
Model SKU00227
Manufacturer Pool & Spa Chemicals
Pack Size No